diff --git a/code/base/test_base.cpp b/code/base/test_base.cpp
index 99fe5b3..6ce99a1 100644
--- a/code/base/test_base.cpp
+++ b/code/base/test_base.cpp
@@ -788,7 +788,7 @@ DECL_API(int) func_test_go(const wchar_t* NAME, const wchar_t* oper, ui_helper*
 	{
 		return ret;
 	}
-	ret = helper->io_control(IO_CTRL_CODE_RESTORE_SETTINGS, NULL, NULL);//结束恢复默认
+	//ret = helper->io_control(IO_CTRL_CODE_RESTORE_SETTINGS, NULL, NULL);//结束恢复默认
 	return ret;
 }
 DECL_API(int) func_test_uninit(void* uninit)
diff --git a/code/base/test_base.h b/code/base/test_base.h
index 7dbb10a..a8e2475 100644
--- a/code/base/test_base.h
+++ b/code/base/test_base.h
@@ -76,76 +76,76 @@
 #define HGPDTTOOLDB_TITLE_CLEAR_ROLLER_COUNT	L"清除滚轴计数"
 //////////////////////////////////////NAME//////////////////////////////////////
 /* 拨码开关校验 */
-#define HGPDTTOOLDB_NAME_DIAL_SWITCH		L"test-1"
+#define HGPDTTOOLDB_NAME_DIAL_SWITCH		L"DIAL_SWITCH"
 /* 检查船型开关功能 */
-#define HGPDTTOOLDB_NAME_ROCKER_SWITCH		L"test-2"
+#define HGPDTTOOLDB_NAME_ROCKER_SWITCH		L"ROCKER_SWITCH"
 /* 设备上电并观察开机状态 */
-#define HGPDTTOOLDB_NAME_BOOT_STATUS		L"test-3"
+#define HGPDTTOOLDB_NAME_BOOT_STATUS		L"BOOT_STATUS"
 /* 检查液晶显示 */
-#define HGPDTTOOLDB_NAME_LCD_DISPLAY		L"test-4"
+#define HGPDTTOOLDB_NAME_LCD_DISPLAY		L"LCD_DISPLAY"
 /* 清理纸道功能确认 */
-#define HGPDTTOOLDB_NAME_CLEAR_PAPER_PATH	L"test-5"
+#define HGPDTTOOLDB_NAME_CLEAR_PAPER_PATH	L"PAPER_PATH	"
 /* 按键功能检测 */
-#define HGPDTTOOLDB_NAME_KEY_FUNCTION		L"test-6"
+#define HGPDTTOOLDB_NAME_KEY_FUNCTION		L"KEY_FUNCTION"
 /* 计数模式检测 */
-#define HGPDTTOOLDB_NAME_COUNTING_MODE		L"test-7"
+#define HGPDTTOOLDB_NAME_COUNTING_MODE		L"COUNTING_MODE	"
 /* 歪斜检测 */
-#define HGPDTTOOLDB_NAME_SKEW_DETECTION		L"test-8"
+#define HGPDTTOOLDB_NAME_SKEW_DETECTION		L"SKEW_DETECTION"
 /* 分纸电机检测 */
-#define HGPDTTOOLDB_NAME_SEPARATER_MOTOR	L"test-9"
+#define HGPDTTOOLDB_NAME_SEPARATER_MOTOR	L"SEPARATER_MOTOR"
 /* CIS原图初检 */
-#define HGPDTTOOLDB_NAME_CIS_ORIGINAL_IMAGE L"test-10"
+#define HGPDTTOOLDB_NAME_CIS_ORIGINAL_IMAGE L"CIS_ORIGINAL_IMAGE"
 /* 主机风扇功能检测 */
-#define HGPDTTOOLDB_NAME_HOST_FAN			L"test-11"
+#define HGPDTTOOLDB_NAME_HOST_FAN			L"HOST_FAN"
 /* 超声波模块检验 */
-#define HGPDTTOOLDB_NAME_ULTRASONIC_MODULE	L"test-12"
+#define HGPDTTOOLDB_NAME_ULTRASONIC_MODULE	L"ULTRASONIC_MODULE"
 /* LED灯状态检查 */
-#define HGPDTTOOLDB_NAME_LED_LIGHT			L"test-13"
+#define HGPDTTOOLDB_NAME_LED_LIGHT			L"LED_LIGHT"
 /* 复位检查 */
-#define HGPDTTOOLDB_NAME_RESET				L"test-14"
+#define HGPDTTOOLDB_NAME_RESET				L"RESET"
 /* 走纸检查 */
-#define HGPDTTOOLDB_NAME_PAPER_FEED			L"test-15"
+#define HGPDTTOOLDB_NAME_PAPER_FEED			L"PAPER_FEED"
 /* 开盖传感器检查 */
-#define HGPDTTOOLDB_NAME_COVER_SENSOR		L"test-16"
+#define HGPDTTOOLDB_NAME_COVER_SENSOR		L"COVER_SENSOR"
 /* 扫描传感器检查 */
-#define HGPDTTOOLDB_NAME_SCANNING_SENSOR	L"test-17"
+#define HGPDTTOOLDB_NAME_SCANNING_SENSOR	L"SCANNING_SENSOR"
 
 /* 配置速度模式 */
-#define HGPDTTOOLDB_NAME_CONFIGURE_SPEED_MODE	L"test-18"
+#define HGPDTTOOLDB_NAME_CONFIGURE_SPEED_MODE	L"CONFIGURE_SPEED_MODE"
 /* 放置校正纸 */
-#define HGPDTTOOLDB_NAME_PLACE_CORRECTION_PAPER L"test-19"
+#define HGPDTTOOLDB_NAME_PLACE_CORRECTION_PAPER L"PLACE_CORRECTION_PAPER"
 /* 自动平场校正 */
-#define HGPDTTOOLDB_NAME_AUTO_FLAT_FIELD	L"test-20"
+#define HGPDTTOOLDB_NAME_AUTO_FLAT_FIELD	L"AUTO_FLAT_FIELD"
 /* 重启设备 */
-#define HGPDTTOOLDB_NAME_REBOOT_DEVICE		L"test-21"
+#define HGPDTTOOLDB_NAME_REBOOT_DEVICE		L"REBOOT_DEVICE"
 /* 扫描图像质量确认 */
-#define HGPDTTOOLDB_NAME_IMAGE_QUALITY		L"test-22"
+#define HGPDTTOOLDB_NAME_IMAGE_QUALITY		L"IMAGE_QUALITY"
 /* 色卡纸成像质量评估 */
-#define HGPDTTOOLDB_NAME_COLORCARD_IMAGEING_QUALITY	L"test-23"
+#define HGPDTTOOLDB_NAME_COLORCARD_IMAGEING_QUALITY	L"COLORCARD_IMAGEING_QUALITY"
 /* 色卡纸偏色成像质量评估 */
-#define HGPDTTOOLDB_NAME_COLORCARD_BIAS_IMAGEING_QUALITY	L"test-24"
+#define HGPDTTOOLDB_NAME_COLORCARD_BIAS_IMAGEING_QUALITY	L"COLORCARD_BIAS_IMAGEING_QUALITY"
 /* 清晰度质量评估 */
-#define HGPDTTOOLDB_NAME_CLARITY_QUALITY	L"test-25"
+#define HGPDTTOOLDB_NAME_CLARITY_QUALITY	L"CLARITY_QUALITY"
 /* 畸变修正 */
-#define HGPDTTOOLDB_NAME_DISTORTION			L"test-26"
+#define HGPDTTOOLDB_NAME_DISTORTION			L"DISTORTION"
 /* 设置休眠 */
-#define HGPDTTOOLDB_NAME_DORMANCY			L"test-27"
+#define HGPDTTOOLDB_NAME_DORMANCY			L"DORMANCY"
 /* 歪斜挡位检测 */
-#define HGPDTTOOLDB_NAME_SKEW_GEAR			L"test-28"
+#define HGPDTTOOLDB_NAME_SKEW_GEAR			L"SKEW_GEAR"
 /* 分纸强度检测 */
-#define HGPDTTOOLDB_NAME_PAPER_SEPARATION_STRENGTH		L"test-29"
+#define HGPDTTOOLDB_NAME_PAPER_SEPARATION_STRENGTH		L"PAPER_SEPARATION_STRENGTH"
 /* 机械走纸倾斜检测 */
-#define HGPDTTOOLDB_NAME_MECH_PAPER_FEEDING_INCLINATION	L"test-30"
+#define HGPDTTOOLDB_NAME_MECH_PAPER_FEEDING_INCLINATION	L"MECH_PAPER_FEEDING_INCLINATION"
 /* 单张测试1 */
-#define HGPDTTOOLDB_NAME_SINGLE_PAGE_TEST_1	L"test-31"
+#define HGPDTTOOLDB_NAME_SINGLE_PAGE_TEST_1	L"SINGLE_PAGE_TEST_1"
 /* 单张测试2 */
-#define HGPDTTOOLDB_NAME_SINGLE_PAGE_TEST_2	L"test-32"
+#define HGPDTTOOLDB_NAME_SINGLE_PAGE_TEST_2	L"SINGLE_PAGE_TEST_2"
 /* 单张测试3 */
-#define HGPDTTOOLDB_NAME_SINGLE_PAGE_TEST_3	L"test-33"
+#define HGPDTTOOLDB_NAME_SINGLE_PAGE_TEST_3	L"SINGLE_PAGE_TEST_3"
 /* 压力测试2轮 */
-#define HGPDTTOOLDB_NAME_PRESSUER_TEST			L"test-34"
+#define HGPDTTOOLDB_NAME_PRESSUER_TEST			L"PRESSUER_TEST"
 /* 清除滚轴计数 */
-#define HGPDTTOOLDB_NAME_CLEAR_ROLLER_COUNT	L"test-35"
+#define HGPDTTOOLDB_NAME_CLEAR_ROLLER_COUNT	L"CLEAR_ROLLER_COUNT"
 
 static struct Test_Map
 {