lmh188
/
twain3.0
mirror of http://192.168.1.51:8099/lmh188/twain3.0
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
twain3.0/3rdparty/hgOCR/leptonica/shear.c

851 lines
30 KiB
C
Raw Blame History

/*====================================================================*
- Copyright (C) 2001 Leptonica. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above
- copyright notice, this list of conditions and the following
- disclaimer in the documentation and/or other materials
- provided with the distribution.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANY
- CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
- OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*====================================================================*/
/*!
* \file shear.c
* <pre>
*
* About arbitrary lines
* PIX *pixHShear()
* PIX *pixVShear()
*
* About special 'points': UL corner and center
* PIX *pixHShearCorner()
* PIX *pixVShearCorner()
* PIX *pixHShearCenter()
* PIX *pixVShearCenter()
*
* In place about arbitrary lines
* l_int32 pixHShearIP()
* l_int32 pixVShearIP()
*
* Linear interpolated shear about arbitrary lines
* PIX *pixHShearLI()
* PIX *pixVShearLI()
*
* Static helper
* static l_float32 normalizeAngleForShear()
* </pre>
*/
#include <string.h>
#include <math.h>
#include "allheaders.h"
/* Shear angle must not get too close to -pi/2 or pi/2 */
static const l_float32 MinDiffFromHalfPi = 0.04;
static l_float32 normalizeAngleForShear(l_float32 radang, l_float32 mindif);
#ifndef NO_CONSOLE_IO
#define DEBUG 0
#endif /* ~NO_CONSOLE_IO */
/*-------------------------------------------------------------*
* About arbitrary lines *
*-------------------------------------------------------------*/
/*!
* \brief pixHShear()
*
* \param[in] pixd [optional] this can be null, equal to pixs,
* or different from pixs
* \param[in] pixs any depth; cmap ok
* \param[in] yloc location of horizontal line, measured from origin
* \param[in] radang angle in radians
* \param[in] incolor L_BRING_IN_WHITE, L_BRING_IN_BLACK;
* \return pixd, always
*
* <pre>
* Notes:
* (1) There are 3 cases:
* (a) pixd == null (make a new pixd)
* (b) pixd == pixs (in-place)
* (c) pixd != pixs
* (2) For these three cases, use these patterns, respectively:
* pixd = pixHShear(NULL, pixs, ...);
* pixHShear(pixs, pixs, ...);
* pixHShear(pixd, pixs, ...);
* (3) This shear leaves the horizontal line of pixels at y = yloc
* invariant. For a positive shear angle, pixels above this
* line are shoved to the right, and pixels below this line
* move to the left.
* (4) With positive shear angle, this can be used, along with
* pixVShear(), to perform a cw rotation, either with 2 shears
* (for small angles) or in the general case with 3 shears.
* (5) Changing the value of yloc is equivalent to translating
* the result horizontally.
* (6) This brings in %incolor pixels from outside the image.
* (7) In-place shears do not work on cmapped pix, because the
* in-place operation cannot initialize to the requested %incolor,
* so we shear from a copy.
* (8) The angle is brought into the range [-pi, -pi]. It is
* not permitted to be within MinDiffFromHalfPi radians
* from either -pi/2 or pi/2.
* </pre>
*/
PIX *
pixHShear(PIX *pixd,
PIX *pixs,
l_int32 yloc,
l_float32 radang,
l_int32 incolor)
{
l_int32 sign, w, h;
l_int32 y, yincr, inityincr, hshift;
l_float32 tanangle, invangle;
PROCNAME("pixHShear");
if (!pixs)
return (PIX *)ERROR_PTR("pixs not defined", procName, pixd);
if (incolor != L_BRING_IN_WHITE && incolor != L_BRING_IN_BLACK)
return (PIX *)ERROR_PTR("invalid incolor value", procName, pixd);
if (pixd == pixs) { /* in place */
if (!pixGetColormap(pixs)) {
pixHShearIP(pixd, yloc, radang, incolor);
} else { /* can't do in-place with a colormap */
PIX *pix1 = pixCopy(NULL, pixs);
pixHShear(pixd, pix1, yloc, radang, incolor);
pixDestroy(&pix1);
}
return pixd;
}
/* Make sure pixd exists and is same size as pixs */
if (!pixd) {
if ((pixd = pixCreateTemplate(pixs)) == NULL)
return (PIX *)ERROR_PTR("pixd not made", procName, NULL);
} else { /* pixd != pixs */
pixResizeImageData(pixd, pixs);
}
/* Normalize angle. If no rotation, return a copy */
radang = normalizeAngleForShear(radang, MinDiffFromHalfPi);
if (radang == 0.0 || tan(radang) == 0.0)
return pixCopy(pixd, pixs);
/* Initialize to value of incoming pixels */
pixSetBlackOrWhite(pixd, incolor);
pixGetDimensions(pixs, &w, &h, NULL);
sign = L_SIGN(radang);
tanangle = tan(radang);
invangle = L_ABS(1. / tanangle);
inityincr = (l_int32)(invangle / 2.);
yincr = (l_int32)invangle;
pixRasterop(pixd, 0, yloc - inityincr, w, 2 * inityincr, PIX_SRC,
pixs, 0, yloc - inityincr);
for (hshift = 1, y = yloc + inityincr; y < h; hshift++) {
yincr = (l_int32)(invangle * (hshift + 0.5) + 0.5) - (y - yloc);
if (h - y < yincr) /* reduce for last one if req'd */
yincr = h - y;
pixRasterop(pixd, -sign*hshift, y, w, yincr, PIX_SRC, pixs, 0, y);
#if DEBUG
fprintf(stderr, "y = %d, hshift = %d, yincr = %d\n", y, hshift, yincr);
#endif /* DEBUG */
y += yincr;
}
for (hshift = -1, y = yloc - inityincr; y > 0; hshift--) {
yincr = (y - yloc) - (l_int32)(invangle * (hshift - 0.5) + 0.5);
if (y < yincr) /* reduce for last one if req'd */
yincr = y;
pixRasterop(pixd, -sign*hshift, y - yincr, w, yincr, PIX_SRC,
pixs, 0, y - yincr);
#if DEBUG
fprintf(stderr, "y = %d, hshift = %d, yincr = %d\n",
y - yincr, hshift, yincr);
#endif /* DEBUG */
y -= yincr;
}
return pixd;
}
/*!
* \brief pixVShear()
*
* \param[in] pixd [optional], this can be null, equal to pixs,
* or different from pixs
* \param[in] pixs any depth; cmap ok
* \param[in] xloc location of vertical line, measured from origin
* \param[in] radang angle in radians; not too close to +-(pi / 2)
* \param[in] incolor L_BRING_IN_WHITE, L_BRING_IN_BLACK;
* \return pixd, or NULL on error
*
* <pre>
* Notes:
* (1) There are 3 cases:
* (a) pixd == null (make a new pixd)
* (b) pixd == pixs (in-place)
* (c) pixd != pixs
* (2) For these three cases, use these patterns, respectively:
* pixd = pixVShear(NULL, pixs, ...);
* pixVShear(pixs, pixs, ...);
* pixVShear(pixd, pixs, ...);
* (3) This shear leaves the vertical line of pixels at x = xloc
* invariant. For a positive shear angle, pixels to the right
* of this line are shoved downward, and pixels to the left
* of the line move upward.
* (4) With positive shear angle, this can be used, along with
* pixHShear(), to perform a cw rotation, either with 2 shears
* (for small angles) or in the general case with 3 shears.
* (5) Changing the value of xloc is equivalent to translating
* the result vertically.
* (6) This brings in %incolor pixels from outside the image.
* (7) In-place shears do not work on cmapped pix, because the
* in-place operation cannot initialize to the requested %incolor,
* so we shear from a copy.
* (8) The angle is brought into the range [-pi, -pi]. It is
* not permitted to be within MinDiffFromHalfPi radians
* from either -pi/2 or pi/2.
* </pre>
*/
PIX *
pixVShear(PIX *pixd,
PIX *pixs,
l_int32 xloc,
l_float32 radang,
l_int32 incolor)
{
l_int32 sign, w, h;
l_int32 x, xincr, initxincr, vshift;
l_float32 tanangle, invangle;
PROCNAME("pixVShear");
if (!pixs)
return (PIX *)ERROR_PTR("pixs not defined", procName, NULL);
if (incolor != L_BRING_IN_WHITE && incolor != L_BRING_IN_BLACK)
return (PIX *)ERROR_PTR("invalid incolor value", procName, NULL);
if (pixd == pixs) { /* in place */
if (!pixGetColormap(pixs)) {
pixVShearIP(pixd, xloc, radang, incolor);
} else { /* can't do in-place with a colormap */
PIX *pix1 = pixCopy(NULL, pixs);
pixVShear(pixd, pix1, xloc, radang, incolor);
pixDestroy(&pix1);
}
return pixd;
}
/* Make sure pixd exists and is same size as pixs */
if (!pixd) {
if ((pixd = pixCreateTemplate(pixs)) == NULL)
return (PIX *)ERROR_PTR("pixd not made", procName, NULL);
} else { /* pixd != pixs */
pixResizeImageData(pixd, pixs);
}
/* Normalize angle. If no rotation, return a copy */
radang = normalizeAngleForShear(radang, MinDiffFromHalfPi);
if (radang == 0.0 || tan(radang) == 0.0)
return pixCopy(pixd, pixs);
/* Initialize to value of incoming pixels */
pixSetBlackOrWhite(pixd, incolor);
pixGetDimensions(pixs, &w, &h, NULL);
sign = L_SIGN(radang);
tanangle = tan(radang);
invangle = L_ABS(1. / tanangle);
initxincr = (l_int32)(invangle / 2.);
xincr = (l_int32)invangle;
pixRasterop(pixd, xloc - initxincr, 0, 2 * initxincr, h, PIX_SRC,
pixs, xloc - initxincr, 0);
for (vshift = 1, x = xloc + initxincr; x < w; vshift++) {
xincr = (l_int32)(invangle * (vshift + 0.5) + 0.5) - (x - xloc);
if (w - x < xincr) /* reduce for last one if req'd */
xincr = w - x;
pixRasterop(pixd, x, sign*vshift, xincr, h, PIX_SRC, pixs, x, 0);
#if DEBUG
fprintf(stderr, "x = %d, vshift = %d, xincr = %d\n", x, vshift, xincr);
#endif /* DEBUG */
x += xincr;
}
for (vshift = -1, x = xloc - initxincr; x > 0; vshift--) {
xincr = (x - xloc) - (l_int32)(invangle * (vshift - 0.5) + 0.5);
if (x < xincr) /* reduce for last one if req'd */
xincr = x;
pixRasterop(pixd, x - xincr, sign*vshift, xincr, h, PIX_SRC,
pixs, x - xincr, 0);
#if DEBUG
fprintf(stderr, "x = %d, vshift = %d, xincr = %d\n",
x - xincr, vshift, xincr);
#endif /* DEBUG */
x -= xincr;
}
return pixd;
}
/*-------------------------------------------------------------*
* Shears about UL corner and center *
*-------------------------------------------------------------*/
/*!
* \brief pixHShearCorner()
*
* \param[in] pixd [optional], if not null, must be equal to pixs
* \param[in] pixs any depth
* \param[in] radang angle in radians
* \param[in] incolor L_BRING_IN_WHITE, L_BRING_IN_BLACK;
* \return pixd, or NULL on error.
*
* <pre>
* Notes:
* (1) See pixHShear() for usage.
* (2) This does a horizontal shear about the UL corner, with (+) shear
* pushing increasingly leftward (-x) with increasing y.
* </pre>
*/
PIX *
pixHShearCorner(PIX *pixd,
PIX *pixs,
l_float32 radang,
l_int32 incolor)
{
PROCNAME("pixHShearCorner");
if (!pixs)
return (PIX *)ERROR_PTR("pixs not defined", procName, pixd);
return pixHShear(pixd, pixs, 0, radang, incolor);
}
/*!
* \brief pixVShearCorner()
*
* \param[in] pixd [optional], if not null, must be equal to pixs
* \param[in] pixs any depth
* \param[in] radang angle in radians
* \param[in] incolor L_BRING_IN_WHITE, L_BRING_IN_BLACK;
* \return pixd, or NULL on error.
*
* <pre>
* Notes:
* (1) See pixVShear() for usage.
* (2) This does a vertical shear about the UL corner, with (+) shear
* pushing increasingly downward (+y) with increasing x.
* </pre>
*/
PIX *
pixVShearCorner(PIX *pixd,
PIX *pixs,
l_float32 radang,
l_int32 incolor)
{
PROCNAME("pixVShearCorner");
if (!pixs)
return (PIX *)ERROR_PTR("pixs not defined", procName, pixd);
return pixVShear(pixd, pixs, 0, radang, incolor);
}
/*!
* \brief pixHShearCenter()
*
* \param[in] pixd [optional] if not null, must be equal to pixs
* \param[in] pixs any depth
* \param[in] radang angle in radians
* \param[in] incolor L_BRING_IN_WHITE, L_BRING_IN_BLACK;
* \return pixd, or NULL on error.
*
* <pre>
* Notes:
* (1) See pixHShear() for usage.
* (2) This does a horizontal shear about the center, with (+) shear
* pushing increasingly leftward (-x) with increasing y.
* </pre>
*/
PIX *
pixHShearCenter(PIX *pixd,
PIX *pixs,
l_float32 radang,
l_int32 incolor)
{
PROCNAME("pixHShearCenter");
if (!pixs)
return (PIX *)ERROR_PTR("pixs not defined", procName, pixd);
return pixHShear(pixd, pixs, pixGetHeight(pixs) / 2, radang, incolor);
}
/*!
* \brief pixVShearCenter()
*
* \param[in] pixd [optional] if not null, must be equal to pixs
* \param[in] pixs any depth
* \param[in] radang angle in radians
* \param[in] incolor L_BRING_IN_WHITE, L_BRING_IN_BLACK;
* \return pixd, or NULL on error.
*
* <pre>
* Notes:
* (1) See pixVShear() for usage.
* (2) This does a vertical shear about the center, with (+) shear
* pushing increasingly downward (+y) with increasing x.
* </pre>
*/
PIX *
pixVShearCenter(PIX *pixd,
PIX *pixs,
l_float32 radang,
l_int32 incolor)
{
PROCNAME("pixVShearCenter");
if (!pixs)
return (PIX *)ERROR_PTR("pixs not defined", procName, pixd);
return pixVShear(pixd, pixs, pixGetWidth(pixs) / 2, radang, incolor);
}
/*--------------------------------------------------------------------------*
* In place about arbitrary lines *
*--------------------------------------------------------------------------*/
/*!
* \brief pixHShearIP()
*
* \param[in] pixs any depth; no cmap
* \param[in] yloc location of horizontal line, measured from origin
* \param[in] radang angle in radians
* \param[in] incolor L_BRING_IN_WHITE, L_BRING_IN_BLACK;
* \return 0 if OK; 1 on error
*
* <pre>
* Notes:
* (1) This is an in-place version of pixHShear(); see comments there.
* (2) This brings in 'incolor' pixels from outside the image.
* (3) pixs cannot be colormapped, because the in-place operation
* only blits in 0 or 1 bits, not an arbitrary colormap index.
* (4) Does a horizontal full-band shear about the line with (+) shear
* pushing increasingly leftward (-x) with increasing y.
* </pre>
*/
l_ok
pixHShearIP(PIX *pixs,
l_int32 yloc,
l_float32 radang,
l_int32 incolor)
{
l_int32 sign, w, h;
l_int32 y, yincr, inityincr, hshift;
l_float32 tanangle, invangle;
PROCNAME("pixHShearIP");
if (!pixs)
return ERROR_INT("pixs not defined", procName, 1);
if (incolor != L_BRING_IN_WHITE && incolor != L_BRING_IN_BLACK)
return ERROR_INT("invalid incolor value", procName, 1);
if (pixGetColormap(pixs))
return ERROR_INT("pixs is colormapped", procName, 1);
/* Normalize angle */
radang = normalizeAngleForShear(radang, MinDiffFromHalfPi);
if (radang == 0.0 || tan(radang) == 0.0)
return 0;
sign = L_SIGN(radang);
pixGetDimensions(pixs, &w, &h, NULL);
tanangle = tan(radang);
invangle = L_ABS(1. / tanangle);
inityincr = (l_int32)(invangle / 2.);
yincr = (l_int32)invangle;
if (inityincr > 0)
pixRasteropHip(pixs, yloc - inityincr, 2 * inityincr, 0, incolor);
for (hshift = 1, y = yloc + inityincr; y < h; hshift++) {
yincr = (l_int32)(invangle * (hshift + 0.5) + 0.5) - (y - yloc);
if (yincr == 0) continue;
if (h - y < yincr) /* reduce for last one if req'd */
yincr = h - y;
pixRasteropHip(pixs, y, yincr, -sign*hshift, incolor);
y += yincr;
}
for (hshift = -1, y = yloc - inityincr; y > 0; hshift--) {
yincr = (y - yloc) - (l_int32)(invangle * (hshift - 0.5) + 0.5);
if (yincr == 0) continue;
if (y < yincr) /* reduce for last one if req'd */
yincr = y;
pixRasteropHip(pixs, y - yincr, yincr, -sign*hshift, incolor);
y -= yincr;
}
return 0;
}
/*!
* \brief pixVShearIP()
*
* \param[in] pixs any depth; no cmap
* \param[in] xloc location of vertical line, measured from origin
* \param[in] radang angle in radians
* \param[in] incolor L_BRING_IN_WHITE, L_BRING_IN_BLACK;
* \return 0 if OK; 1 on error
*
* <pre>
* Notes:
* (1) This is an in-place version of pixVShear(); see comments there.
* (2) This brings in 'incolor' pixels from outside the image.
* (3) pixs cannot be colormapped, because the in-place operation
* only blits in 0 or 1 bits, not an arbitrary colormap index.
* (4) Does a vertical full-band shear about the line with (+) shear
* pushing increasingly downward (+y) with increasing x.
* </pre>
*/
l_ok
pixVShearIP(PIX *pixs,
l_int32 xloc,
l_float32 radang,
l_int32 incolor)
{
l_int32 sign, w, h;
l_int32 x, xincr, initxincr, vshift;
l_float32 tanangle, invangle;
PROCNAME("pixVShearIP");
if (!pixs)
return ERROR_INT("pixs not defined", procName, 1);
if (incolor != L_BRING_IN_WHITE && incolor != L_BRING_IN_BLACK)
return ERROR_INT("invalid incolor value", procName, 1);
if (pixGetColormap(pixs))
return ERROR_INT("pixs is colormapped", procName, 1);
/* Normalize angle */
radang = normalizeAngleForShear(radang, MinDiffFromHalfPi);
if (radang == 0.0 || tan(radang) == 0.0)
return 0;
sign = L_SIGN(radang);
pixGetDimensions(pixs, &w, &h, NULL);
tanangle = tan(radang);
invangle = L_ABS(1. / tanangle);
initxincr = (l_int32)(invangle / 2.);
xincr = (l_int32)invangle;
if (initxincr > 0)
pixRasteropVip(pixs, xloc - initxincr, 2 * initxincr, 0, incolor);
for (vshift = 1, x = xloc + initxincr; x < w; vshift++) {
xincr = (l_int32)(invangle * (vshift + 0.5) + 0.5) - (x - xloc);
if (xincr == 0) continue;
if (w - x < xincr) /* reduce for last one if req'd */
xincr = w - x;
pixRasteropVip(pixs, x, xincr, sign*vshift, incolor);
x += xincr;
}
for (vshift = -1, x = xloc - initxincr; x > 0; vshift--) {
xincr = (x - xloc) - (l_int32)(invangle * (vshift - 0.5) + 0.5);
if (xincr == 0) continue;
if (x < xincr) /* reduce for last one if req'd */
xincr = x;
pixRasteropVip(pixs, x - xincr, xincr, sign*vshift, incolor);
x -= xincr;
}
return 0;
}
/*-------------------------------------------------------------------------*
* Linear interpolated shear about arbitrary lines *
*-------------------------------------------------------------------------*/
/*!
* \brief pixHShearLI()
*
* \param[in] pixs 8 bpp or 32 bpp, or colormapped
* \param[in] yloc location of horizontal line, measured from origin
* \param[in] radang angle in radians, in range (-pi/2 ... pi/2)
* \param[in] incolor L_BRING_IN_WHITE, L_BRING_IN_BLACK;
* \return pixd sheared, or NULL on error
*
* <pre>
* Notes:
* (1) This does horizontal shear with linear interpolation for
* accurate results on 8 bpp gray, 32 bpp rgb, or cmapped images.
* It is relatively slow compared to the sampled version
* implemented by rasterop, but the result is much smoother.
* (2) This shear leaves the horizontal line of pixels at y = yloc
* invariant. For a positive shear angle, pixels above this
* line are shoved to the right, and pixels below this line
* move to the left.
* (3) Any colormap is removed.
* (4) The angle is brought into the range [-pi/2 + del, pi/2 - del],
* where del == MinDiffFromHalfPi.
* </pre>
*/
PIX *
pixHShearLI(PIX *pixs,
l_int32 yloc,
l_float32 radang,
l_int32 incolor)
{
l_int32 i, jd, x, xp, xf, w, h, d, wm, wpls, wpld, val, rval, gval, bval;
l_uint32 word0, word1;
l_uint32 *datas, *datad, *lines, *lined;
l_float32 tanangle, xshift;
PIX *pix, *pixd;
PROCNAME("pixHShearLI");
if (!pixs)
return (PIX *)ERROR_PTR("pixs not defined", procName, NULL);
pixGetDimensions(pixs, &w, &h, &d);
if (d != 8 && d != 32 && !pixGetColormap(pixs))
return (PIX *)ERROR_PTR("pixs not 8, 32 bpp, or cmap", procName, NULL);
if (incolor != L_BRING_IN_WHITE && incolor != L_BRING_IN_BLACK)
return (PIX *)ERROR_PTR("invalid incolor value", procName, NULL);
if (yloc < 0 || yloc >= h)
return (PIX *)ERROR_PTR("yloc not in [0 ... h-1]", procName, NULL);
if (pixGetColormap(pixs))
pix = pixRemoveColormap(pixs, REMOVE_CMAP_BASED_ON_SRC);
else
pix = pixClone(pixs);
/* Normalize angle. If no rotation, return a copy */
radang = normalizeAngleForShear(radang, MinDiffFromHalfPi);
if (radang == 0.0 || tan(radang) == 0.0) {
pixDestroy(&pix);
return pixCopy(NULL, pixs);
}
/* Initialize to value of incoming pixels */
pixd = pixCreateTemplate(pix);
pixSetBlackOrWhite(pixd, incolor);
/* Standard linear interp: subdivide each pixel into 64 parts */
d = pixGetDepth(pixd); /* 8 or 32 */
datas = pixGetData(pix);
datad = pixGetData(pixd);
wpls = pixGetWpl(pix);
wpld = pixGetWpl(pixd);
tanangle = tan(radang);
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
lined = datad + i * wpld;
xshift = (yloc - i) * tanangle;
for (jd = 0; jd < w; jd++) {
x = (l_int32)(64.0 * (-xshift + jd) + 0.5);
xp = x / 64;
xf = x & 63;
wm = w - 1;
if (xp < 0 || xp > wm) continue;
if (d == 8) {
if (xp < wm) {
val = ((63 - xf) * GET_DATA_BYTE(lines, xp) +
xf * GET_DATA_BYTE(lines, xp + 1) + 31) / 63;
} else { /* xp == wm */
val = GET_DATA_BYTE(lines, xp);
}
SET_DATA_BYTE(lined, jd, val);
} else { /* d == 32 */
if (xp < wm) {
word0 = *(lines + xp);
word1 = *(lines + xp + 1);
rval = ((63 - xf) * ((word0 >> L_RED_SHIFT) & 0xff) +
xf * ((word1 >> L_RED_SHIFT) & 0xff) + 31) / 63;
gval = ((63 - xf) * ((word0 >> L_GREEN_SHIFT) & 0xff) +
xf * ((word1 >> L_GREEN_SHIFT) & 0xff) + 31) / 63;
bval = ((63 - xf) * ((word0 >> L_BLUE_SHIFT) & 0xff) +
xf * ((word1 >> L_BLUE_SHIFT) & 0xff) + 31) / 63;
composeRGBPixel(rval, gval, bval, lined + jd);
} else { /* xp == wm */
lined[jd] = lines[xp];
}
}
}
}
pixDestroy(&pix);
return pixd;
}
/*!
* \brief pixVShearLI()
*
* \param[in] pixs 8 bpp or 32 bpp, or colormapped
* \param[in] xloc location of vertical line, measured from origin
* \param[in] radang angle in radians, in range (-pi/2 ... pi/2)
* \param[in] incolor L_BRING_IN_WHITE, L_BRING_IN_BLACK;
* \return pixd sheared, or NULL on error
*
* <pre>
* Notes:
* (1) This does vertical shear with linear interpolation for
* accurate results on 8 bpp gray, 32 bpp rgb, or cmapped images.
* It is relatively slow compared to the sampled version
* implemented by rasterop, but the result is much smoother.
* (2) This shear leaves the vertical line of pixels at x = xloc
* invariant. For a positive shear angle, pixels to the right
* of this line are shoved downward, and pixels to the left
* of the line move upward.
* (3) Any colormap is removed.
* (4) The angle is brought into the range [-pi/2 + del, pi/2 - del],
* where del == MinDiffFromHalfPi.
* </pre>
*/
PIX *
pixVShearLI(PIX *pixs,
l_int32 xloc,
l_float32 radang,
l_int32 incolor)
{
l_int32 id, y, yp, yf, j, w, h, d, hm, wpls, wpld, val, rval, gval, bval;
l_uint32 word0, word1;
l_uint32 *datas, *datad, *lines, *lined;
l_float32 tanangle, yshift;
PIX *pix, *pixd;
PROCNAME("pixVShearLI");
if (!pixs)
return (PIX *)ERROR_PTR("pixs not defined", procName, NULL);
pixGetDimensions(pixs, &w, &h, &d);
if (d != 8 && d != 32 && !pixGetColormap(pixs))
return (PIX *)ERROR_PTR("pixs not 8, 32 bpp, or cmap", procName, NULL);
if (incolor != L_BRING_IN_WHITE && incolor != L_BRING_IN_BLACK)
return (PIX *)ERROR_PTR("invalid incolor value", procName, NULL);
if (xloc < 0 || xloc >= w)
return (PIX *)ERROR_PTR("xloc not in [0 ... w-1]", procName, NULL);
if (pixGetColormap(pixs))
pix = pixRemoveColormap(pixs, REMOVE_CMAP_BASED_ON_SRC);
else
pix = pixClone(pixs);
/* Normalize angle. If no rotation, return a copy */
radang = normalizeAngleForShear(radang, MinDiffFromHalfPi);
if (radang == 0.0 || tan(radang) == 0.0) {
pixDestroy(&pix);
return pixCopy(NULL, pixs);
}
/* Initialize to value of incoming pixels */
pixd = pixCreateTemplate(pix);
pixSetBlackOrWhite(pixd, incolor);
/* Standard linear interp: subdivide each pixel into 64 parts */
d = pixGetDepth(pixd); /* 8 or 32 */
datas = pixGetData(pix);
datad = pixGetData(pixd);
wpls = pixGetWpl(pix);
wpld = pixGetWpl(pixd);
tanangle = tan(radang);
for (j = 0; j < w; j++) {
yshift = (j - xloc) * tanangle;
for (id = 0; id < h; id++) {
y = (l_int32)(64.0 * (-yshift + id) + 0.5);
yp = y / 64;
yf = y & 63;
hm = h - 1;
if (yp < 0 || yp > hm) continue;
lines = datas + yp * wpls;
lined = datad + id * wpld;
if (d == 8) {
if (yp < hm) {
val = ((63 - yf) * GET_DATA_BYTE(lines, j) +
yf * GET_DATA_BYTE(lines + wpls, j) + 31) / 63;
} else { /* yp == hm */
val = GET_DATA_BYTE(lines, j);
}
SET_DATA_BYTE(lined, j, val);
} else { /* d == 32 */
if (yp < hm) {
word0 = *(lines + j);
word1 = *(lines + wpls + j);
rval = ((63 - yf) * ((word0 >> L_RED_SHIFT) & 0xff) +
yf * ((word1 >> L_RED_SHIFT) & 0xff) + 31) / 63;
gval = ((63 - yf) * ((word0 >> L_GREEN_SHIFT) & 0xff) +
yf * ((word1 >> L_GREEN_SHIFT) & 0xff) + 31) / 63;
bval = ((63 - yf) * ((word0 >> L_BLUE_SHIFT) & 0xff) +
yf * ((word1 >> L_BLUE_SHIFT) & 0xff) + 31) / 63;
composeRGBPixel(rval, gval, bval, lined + j);
} else { /* yp == hm */
lined[j] = lines[j];
}
}
}
}
pixDestroy(&pix);
return pixd;
}
/*-------------------------------------------------------------------------*
* Angle normalization *
*-------------------------------------------------------------------------*/
static l_float32
normalizeAngleForShear(l_float32 radang,
l_float32 mindif)
{
l_float32 pi2;
PROCNAME("normalizeAngleForShear");
/* Bring angle into range [-pi/2, pi/2] */
pi2 = 3.14159265 / 2.0;
if (radang < -pi2 || radang > pi2)
radang = radang - (l_int32)(radang / pi2) * pi2;
/* If angle is too close to pi/2 or -pi/2, move it */
if (radang > pi2 - mindif) {
L_WARNING("angle close to pi/2; shifting away\n", procName);
radang = pi2 - mindif;
} else if (radang < -pi2 + mindif) {
L_WARNING("angle close to -pi/2; shifting away\n", procName);
radang = -pi2 + mindif;
}
return radang;
}
Reference in New Issue View Git Blame Copy Permalink