lmh188
/
twain3
mirror of http://192.168.1.51:8099/lmh188/twain3
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
twain3/Tirdparty/3rdparty/win/ddk/parallel.h

756 lines
27 KiB
C
Raw Permalink Blame History

/*++
Copyright (c) Microsoft Corporation. All rights reserved.
Module Name:
parallel.h
Abstract:
This file defines the services supplied by the ParPort driver.
Revision History:
--*/
#ifndef _PARALLEL_
#define _PARALLEL_
#include <ntddpar.h>
//
// Define the parallel port device name strings.
//
#define DD_PARALLEL_PORT_BASE_NAME_U L"ParallelPort"
//
// IEEE 1284.3 Daisy Chain (DC) Device ID's range from 0 to 3. Devices
// are identified based on their connection order in the daisy chain
// relative to the other 1284.3 DC devices. Device 0 is the 1284.3 DC
// device that is closest to host port.
//
#define IEEE_1284_3_DAISY_CHAIN_MAX_ID 3
//
// NtDeviceIoControlFile internal IoControlCode values for parallel device.
//
// Legacy - acquires entire parallel "bus"
#define IOCTL_INTERNAL_PARALLEL_PORT_ALLOCATE CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 11, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_INTERNAL_GET_PARALLEL_PORT_INFO CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 12, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_INTERNAL_PARALLEL_CONNECT_INTERRUPT CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 13, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_INTERNAL_PARALLEL_DISCONNECT_INTERRUPT CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 14, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_INTERNAL_RELEASE_PARALLEL_PORT_INFO CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 15, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_INTERNAL_GET_MORE_PARALLEL_PORT_INFO CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 17, METHOD_BUFFERED, FILE_ANY_ACCESS)
// Saves current chipset mode - puts the chipset into Specified mode (implemented in filter)
#define IOCTL_INTERNAL_PARCHIP_CONNECT CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 18, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_INTERNAL_PARALLEL_SET_CHIP_MODE CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 19, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_INTERNAL_PARALLEL_CLEAR_CHIP_MODE CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 20, METHOD_BUFFERED, FILE_ANY_ACCESS)
// New parport IOCTLs
#define IOCTL_INTERNAL_GET_PARALLEL_PNP_INFO CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 21, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_INTERNAL_INIT_1284_3_BUS CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 22, METHOD_BUFFERED, FILE_ANY_ACCESS)
// Takes a flat namespace Id for the device, also acquires the port
#define IOCTL_INTERNAL_SELECT_DEVICE CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 23, METHOD_BUFFERED, FILE_ANY_ACCESS)
// Takes a flat namespace Id for the device, also releases the port
#define IOCTL_INTERNAL_DESELECT_DEVICE CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 24, METHOD_BUFFERED, FILE_ANY_ACCESS)
// New parclass IOCTLs
#if (NTDDI_VERSION >= NTDDI_WINXP) // Windows XP
#define IOCTL_INTERNAL_GET_PARPORT_FDO CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 29, METHOD_BUFFERED, FILE_ANY_ACCESS)
#endif
#define IOCTL_INTERNAL_PARCLASS_CONNECT CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 30, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_INTERNAL_PARCLASS_DISCONNECT CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 31, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_INTERNAL_DISCONNECT_IDLE CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 32, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_INTERNAL_LOCK_PORT CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 37, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_INTERNAL_UNLOCK_PORT CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 38, METHOD_BUFFERED, FILE_ANY_ACCESS)
// IOCTL version of call to ParPort's FreePort function
#define IOCTL_INTERNAL_PARALLEL_PORT_FREE CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 40, METHOD_BUFFERED, FILE_ANY_ACCESS)
// IOCTLs for IEEE1284.3
#define IOCTL_INTERNAL_PARDOT3_CONNECT CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 41, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_INTERNAL_PARDOT3_DISCONNECT CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 42, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_INTERNAL_PARDOT3_RESET CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 43, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_INTERNAL_PARDOT3_SIGNAL CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 44, METHOD_BUFFERED, FILE_ANY_ACCESS)
//
// IOCTLs for registering/unregistering for ParPort's RemovalRelations
//
// - A device object should register for removal relations with a
// parport device if the device is physically connected to the
// parallel port.
//
// - Parport will report all devices that have registered with it for
// removal relations in response to a PnP QUERY_DEVICE_RELATIONS of
// type RemovalRelations. This allows PnP to remove all device stacks
// that depend on the parport device prior to removing the parport
// device itself.
//
// - The single Input parameter is a PARPORT_REMOVAL_RELATIONS
// structure that is defined below
//
#define IOCTL_INTERNAL_REGISTER_FOR_REMOVAL_RELATIONS CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 50, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_INTERNAL_UNREGISTER_FOR_REMOVAL_RELATIONS CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 51, METHOD_BUFFERED, FILE_ANY_ACCESS)
typedef struct _PARPORT_REMOVAL_RELATIONS {
PDEVICE_OBJECT DeviceObject; // device object that is registering w/Parport
ULONG Flags; // Flags - reserved - set to 0 for now
PUNICODE_STRING DeviceName; // DeviceName identifier of device registering for removal relations - used for debugging
// - printed in parport's debug spew - convention is to use same DeviceName that was passed to
// IoCreateDevice
} PARPORT_REMOVAL_RELATIONS, *PPARPORT_REMOVAL_RELATIONS;
#if (NTDDI_VERSION >= NTDDI_WINXP) // Windows XP
#define IOCTL_INTERNAL_LOCK_PORT_NO_SELECT CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 52, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_INTERNAL_UNLOCK_PORT_NO_DESELECT CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 53, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_INTERNAL_DISABLE_END_OF_CHAIN_BUS_RESCAN CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 54, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_INTERNAL_ENABLE_END_OF_CHAIN_BUS_RESCAN CTL_CODE(FILE_DEVICE_PARALLEL_PORT, 55, METHOD_BUFFERED, FILE_ANY_ACCESS)
#endif
// Define 1284.3 command qualifiers
#define MODE_LEN_1284_3 7 // # of magic sequence bytes
static UCHAR ModeQualifier[MODE_LEN_1284_3] = { 0xAA, 0x55, 0x00, 0xFF, 0x87, 0x78, 0xFF };
#define LEGACYZIP_MODE_LEN 3
static UCHAR LegacyZipModeQualifier[LEGACYZIP_MODE_LEN] = { 0x00, 0x3c, 0x20 };
typedef enum {
P12843DL_OFF,
P12843DL_DOT3_DL,
P12843DL_MLC_DL,
P12843DL_DOT4_DL
} P12843_DL_MODES;
// Define 1284.3 Commands
#define CPP_ASSIGN_ADDR 0x00
#define CPP_SELECT 0xE0
#define CPP_DESELECT 0x30
#define CPP_QUERY_INT 0x08
#define CPP_DISABLE_INT 0x40
#define CPP_ENABLE_INT 0x48
#define CPP_CLEAR_INT_LAT 0x50
#define CPP_SET_INT_LAT 0x58
#define CPP_COMMAND_FILTER 0xF8
typedef
BOOLEAN
(*PPARALLEL_TRY_ALLOCATE_ROUTINE) (
__in PVOID TryAllocateContext
);
typedef
VOID
(*PPARALLEL_FREE_ROUTINE) (
__in PVOID FreeContext
);
typedef
ULONG
(*PPARALLEL_QUERY_WAITERS_ROUTINE) (
__in PVOID QueryAllocsContext
);
typedef
NTSTATUS
(*PPARALLEL_SET_CHIP_MODE) (
__in PVOID SetChipContext,
__in UCHAR ChipMode
);
typedef
NTSTATUS
(*PPARALLEL_CLEAR_CHIP_MODE) (
__in PVOID ClearChipContext,
__in UCHAR ChipMode
);
typedef
NTSTATUS
(*PPARALLEL_TRY_SELECT_ROUTINE) (
__in PVOID TrySelectContext,
__in PVOID TrySelectCommand
);
typedef
NTSTATUS
(*PPARALLEL_DESELECT_ROUTINE) (
__in PVOID DeselectContext,
__in PVOID DeselectCommand
);
typedef
NTSTATUS
(*PPARCHIP_SET_CHIP_MODE) (
__in PVOID SetChipContext,
__in UCHAR ChipMode
);
typedef
NTSTATUS
(*PPARCHIP_CLEAR_CHIP_MODE) (
__in PVOID ClearChipContext,
__in UCHAR ChipMode
);
//
// Hardware Capabilities
//
#define PPT_NO_HARDWARE_PRESENT 0x00000000
#define PPT_ECP_PRESENT 0x00000001
#define PPT_EPP_PRESENT 0x00000002
#define PPT_EPP_32_PRESENT 0x00000004
#define PPT_BYTE_PRESENT 0x00000008
#define PPT_BIDI_PRESENT 0x00000008 // deprecated - will be removed soon! dvdf
#define PPT_1284_3_PRESENT 0x00000010
// Added DVDR 10-6-98
// Structure passed to the ParChip Filter when calling it
// with the IOCTL_INTERNAL_CHIP_FILTER_CONNECT ioctl
typedef struct _PARALLEL_PARCHIP_INFO {
PUCHAR Controller;
PUCHAR EcrController;
ULONG HardwareModes;
PPARCHIP_SET_CHIP_MODE ParChipSetMode;
PPARCHIP_CLEAR_CHIP_MODE ParChipClearMode;
PVOID Context;
BOOLEAN success;
} PARALLEL_PARCHIP_INFO, *PPARALLEL_PARCHIP_INFO;
// End Added by DVDR 10-6-1998
typedef struct _PARALLEL_PORT_INFORMATION {
PHYSICAL_ADDRESS OriginalController;
PUCHAR Controller;
ULONG SpanOfController;
PPARALLEL_TRY_ALLOCATE_ROUTINE TryAllocatePort; // nonblocking callback to allocate port
PPARALLEL_FREE_ROUTINE FreePort; // callback to free port
PPARALLEL_QUERY_WAITERS_ROUTINE QueryNumWaiters; // callback to query number of waiters for port allocation
PVOID Context; // context for callbacks to ParPort device
} PARALLEL_PORT_INFORMATION, *PPARALLEL_PORT_INFORMATION;
typedef struct _PARALLEL_PNP_INFORMATION {
PHYSICAL_ADDRESS OriginalEcpController;
PUCHAR EcpController;
ULONG SpanOfEcpController;
ULONG PortNumber; // deprecated - do not use
ULONG HardwareCapabilities;
PPARALLEL_SET_CHIP_MODE TrySetChipMode;
PPARALLEL_CLEAR_CHIP_MODE ClearChipMode;
ULONG FifoDepth;
ULONG FifoWidth;
PHYSICAL_ADDRESS EppControllerPhysicalAddress;
ULONG SpanOfEppController;
ULONG Ieee1284_3DeviceCount; // number of .3 daisy chain devices connected to this ParPort
PPARALLEL_TRY_SELECT_ROUTINE TrySelectDevice;
PPARALLEL_DESELECT_ROUTINE DeselectDevice;
PVOID Context;
ULONG CurrentMode;
PWSTR PortName; // symbolic link name for legacy device object
} PARALLEL_PNP_INFORMATION, *PPARALLEL_PNP_INFORMATION;
// Start Added by DVDR 2-19-1998
//
// PARALLEL_1284_COMMAND CommandFlags
//
// this flag is deprecated - use 1284.3 daisy chain ID == 4 to indicate End-Of-Chain device
#define PAR_END_OF_CHAIN_DEVICE ((ULONG)0x00000001) // The target device for this command
// is an End-Of-Chain device, the
// contents of the ID field are
// undefined and should be ignored
#define PAR_HAVE_PORT_KEEP_PORT ((ULONG)0x00000002) // Indicates that the requesting driver
// has previously acquired the parallel port
// and does is not ready to release it yet.
//
// On a SELECT_DEVICE ParPort should NOT
// try to acquire the port before selecting
// the device.
//
// On a DESELECT_DEVICE ParPort should NOT
// free the port after deselecting the device.
#define PAR_LEGACY_ZIP_DRIVE ((ULONG)0x00000004) // The target device for this command
// is a Legacy Iomega Zip drive, the
// contents of the ID field are
// undefined and should be ignored
#define PAR_LEGACY_ZIP_DRIVE_STD_MODE ((ULONG)0x00000010) // The target device for these commands
#define PAR_LEGACY_ZIP_DRIVE_EPP_MODE ((ULONG)0x00000020) // are a Legacy Iomega Zip drive, the
// contents of the ID field are
// undefined and should be ignored
// This will select the Zip into DISK or EPP Mode
#define DOT3_END_OF_CHAIN_ID 4 // this ID used in a 1284.3 SELECT or DESELECT means the End-Of-Chain device
#define DOT3_LEGACY_ZIP_ID 5 // this ID used in a 1284.3 SELECT or DESELECT means Legacy Zip drive
//
// The following structure is passed in on an
// IOCTL_INTERNAL_SELECT_DEVICE and on an
// IOCTL_INTERNAL_DESELECT_DEVICE
typedef struct _PARALLEL_1284_COMMAND {
UCHAR ID; // 0..3 for 1284.3 daisy chain device, 4 for End-Of-Chain device, 5 for Legacy Zip
UCHAR Port; // reserved ( set == 0 )
ULONG CommandFlags; // see above
} PARALLEL_1284_COMMAND, *PPARALLEL_1284_COMMAND;
//
// Hardware Modes
//
#define INITIAL_MODE 0x00000000
// Disable Parchip and ECR arbitrator
// 0 - Parchip and ecr arbritrator is off
// 1 - Parchip and ecr arbitrator is on
#define PARCHIP_ECR_ARBITRATOR 1
//
// The following structure is passed in on an
// IOCTL_INTERNAL_PARALLEL_SET_CHIP_MODE and on an
// IOCTL_INTERNAL_PARALLEL_CLEAR_CHIP_MODE
//
typedef struct _PARALLEL_CHIP_MODE {
UCHAR ModeFlags;
BOOLEAN success;
} PARALLEL_CHIP_MODE, *PPARALLEL_CHIP_MODE;
// End Added by DVDR 2-19-1998
//
// The following structure is passed in on an
// IOCTL_INTERNAL_PARALLEL_CONNECT_INTERRUPT and on an
// IOCTL_INTERNAL_PARALLEL_DISCONNECT_INTERRUPT request.
//
typedef
VOID
(*PPARALLEL_DEFERRED_ROUTINE) (
__in PVOID DeferredContext
);
typedef struct _PARALLEL_INTERRUPT_SERVICE_ROUTINE {
PKSERVICE_ROUTINE InterruptServiceRoutine;
PVOID InterruptServiceContext;
PPARALLEL_DEFERRED_ROUTINE DeferredPortCheckRoutine; /* OPTIONAL */
PVOID DeferredPortCheckContext; /* OPTIONAL */
} PARALLEL_INTERRUPT_SERVICE_ROUTINE, *PPARALLEL_INTERRUPT_SERVICE_ROUTINE;
//
// The following structure is returned on an
// IOCTL_INTERNAL_PARALLEL_CONNECT_INTERRUPT request;
//
typedef struct _PARALLEL_INTERRUPT_INFORMATION {
PKINTERRUPT InterruptObject;
PPARALLEL_TRY_ALLOCATE_ROUTINE TryAllocatePortAtInterruptLevel;
PPARALLEL_FREE_ROUTINE FreePortFromInterruptLevel;
PVOID Context;
} PARALLEL_INTERRUPT_INFORMATION, *PPARALLEL_INTERRUPT_INFORMATION;
//
// The following structure is returned on an
// IOCTL_INTERNAL_GET_MORE_PARALLEL_PORT_INFO.
//
typedef struct _MORE_PARALLEL_PORT_INFORMATION {
INTERFACE_TYPE InterfaceType;
ULONG BusNumber;
ULONG InterruptLevel;
ULONG InterruptVector;
KAFFINITY InterruptAffinity;
KINTERRUPT_MODE InterruptMode;
} MORE_PARALLEL_PORT_INFORMATION, *PMORE_PARALLEL_PORT_INFORMATION;
typedef enum {
SAFE_MODE,
UNSAFE_MODE // Available only through kernel. Your driver
// will be humiliated if you choose UNSAFE_MODE and
// then "make a mistake". - dvrh (PCized by dvdf)
} PARALLEL_SAFETY;
//
// The following structure is returned by
// IOCTL_INTERNAL_PARCLASS_CONNECT.
//
typedef
USHORT
(*PDETERMINE_IEEE_MODES) (
__in PVOID Context
);
#define OLD_PARCLASS 0
#if OLD_PARCLASS
typedef
NTSTATUS
(*PNEGOTIATE_IEEE_MODE) (
__in PVOID Extension,
__in UCHAR Extensibility
);
#else
typedef
NTSTATUS
(*PNEGOTIATE_IEEE_MODE) (
__in PVOID Context,
__in USHORT ModeMaskFwd,
__in USHORT ModeMaskRev,
__in PARALLEL_SAFETY ModeSafety,
__in BOOLEAN IsForward
);
#endif
typedef
NTSTATUS
(*PTERMINATE_IEEE_MODE) (
__in PVOID Context
);
typedef
NTSTATUS
(*PPARALLEL_IEEE_FWD_TO_REV)(
__in PVOID Context
);
typedef
NTSTATUS
(*PPARALLEL_IEEE_REV_TO_FWD)(
__in PVOID Context
);
typedef
NTSTATUS
(*PPARALLEL_READ) (
__in PVOID Context,
__out_bcount_part(NumBytesToRead,*NumBytesRead) PVOID Buffer,
__in ULONG NumBytesToRead,
__out PULONG NumBytesRead,
__in UCHAR Channel
);
typedef
NTSTATUS
(*PPARALLEL_WRITE) (
__in PVOID Context,
__in_bcount(NumBytesToWrite) PVOID Buffer,
__in ULONG NumBytesToWrite,
__out PULONG NumBytesWritten,
__in UCHAR Channel
);
typedef
NTSTATUS
(*PPARALLEL_TRYSELECT_DEVICE) (
__in PVOID Context,
__in PARALLEL_1284_COMMAND Command
);
typedef
NTSTATUS
(*PPARALLEL_DESELECT_DEVICE) (
__in PVOID Context,
__in PARALLEL_1284_COMMAND Command
);
typedef struct _PARCLASS_INFORMATION {
PUCHAR Controller;
PUCHAR EcrController;
ULONG SpanOfController;
PDETERMINE_IEEE_MODES DetermineIeeeModes;
PNEGOTIATE_IEEE_MODE NegotiateIeeeMode;
PTERMINATE_IEEE_MODE TerminateIeeeMode;
PPARALLEL_IEEE_FWD_TO_REV IeeeFwdToRevMode;
PPARALLEL_IEEE_REV_TO_FWD IeeeRevToFwdMode;
PPARALLEL_READ ParallelRead;
PPARALLEL_WRITE ParallelWrite;
PVOID ParclassContext;
ULONG HardwareCapabilities;
ULONG FifoDepth;
ULONG FifoWidth;
PPARALLEL_TRYSELECT_DEVICE ParallelTryselect;
PPARALLEL_DESELECT_DEVICE ParallelDeSelect;
} PARCLASS_INFORMATION, *PPARCLASS_INFORMATION;
//
// Standard and ECP parallel port offsets.
//
#define DATA_OFFSET 0
#define OFFSET_ECP_AFIFO 0x0000 // ECP Mode Address FIFO
#define AFIFO_OFFSET OFFSET_ECP_AFIFO // ECP Mode Address FIFO
#define DSR_OFFSET 1
#define DCR_OFFSET 2
#define EPP_OFFSET 4
// default to the old defines - note that the old defines break on PCI cards
#ifndef DVRH_USE_PARPORT_ECP_ADDR
#define DVRH_USE_PARPORT_ECP_ADDR 0
#endif
// DVRH_USE_PARPORT_ECP_ADDR settings
// 0 - ECP registers are hardcoded to
// Controller + 0x400
// 1 - ECP registers are pulled from
// Parport which hopefully got
// them from PnP.
#if (0 == DVRH_USE_PARPORT_ECP_ADDR)
// ***Note: These do not hold for PCI parallel ports
#define ECP_OFFSET 0x400
#define CNFGB_OFFSET 0x401
#define ECR_OFFSET 0x402
#else
#define ECP_OFFSET 0x0
#define CNFGB_OFFSET 0x1
#define ECR_OFFSET 0x2
#endif
#define FIFO_OFFSET ECP_OFFSET
#define CFIFO_OFFSET ECP_OFFSET
#define CNFGA_OFFSET ECP_OFFSET
#define ECP_DFIFO_OFFSET ECP_OFFSET // ECP Mode Data FIFO
#define TFIFO_OFFSET ECP_OFFSET
#define OFFSET_ECP_DFIFO ECP_OFFSET // ECP Mode Data FIFO
#define OFFSET_TFIFO ECP_OFFSET // Test FIFO
#define OFFSET_CFIFO ECP_OFFSET // Fast Centronics Data FIFO
#define OFFSET_ECR ECR_OFFSET // Extended Control Register
#define OFFSET_PARALLEL_REGISTER_SPAN 0x0003
#define ECP_SPAN 3
#define EPP_SPAN 4
//
// Bit definitions for the DSR.
//
#define DSR_NOT_BUSY 0x80
#define DSR_NOT_ACK 0x40
#define DSR_PERROR 0x20
#define DSR_SELECT 0x10
#define DSR_NOT_FAULT 0x08
//
// More bit definitions for the DSR.
//
#define DSR_NOT_PTR_BUSY 0x80
#define DSR_NOT_PERIPH_ACK 0x80
#define DSR_WAIT 0x80
#define DSR_PTR_CLK 0x40
#define DSR_PERIPH_CLK 0x40
#define DSR_INTR 0x40
#define DSR_ACK_DATA_REQ 0x20
#define DSR_NOT_ACK_REVERSE 0x20
#define DSR_XFLAG 0x10
#define DSR_NOT_DATA_AVAIL 0x08
#define DSR_NOT_PERIPH_REQUEST 0x08
//
// Bit definitions for the DCR.
//
#define DCR_RESERVED 0xC0
#define DCR_DIRECTION 0x20
#define DCR_ACKINT_ENABLED 0x10
#define DCR_SELECT_IN 0x08
#define DCR_NOT_INIT 0x04
#define DCR_AUTOFEED 0x02
#define DCR_STROBE 0x01
//
// More bit definitions for the DCR.
//
#define DCR_NOT_1284_ACTIVE 0x08
#define DCR_ASTRB 0x08
#define DCR_NOT_REVERSE_REQUEST 0x04
#define DCR_NULL 0x04
#define DCR_NOT_HOST_BUSY 0x02
#define DCR_NOT_HOST_ACK 0x02
#define DCR_DSTRB 0x02
#define DCR_NOT_HOST_CLK 0x01
#define DCR_WRITE 0x01
//
// Bit definitions for configuration register A.
//
#define CNFGA_IMPID_MASK 0x70
#define CNFGA_IMPID_16BIT 0x00
#define CNFGA_IMPID_8BIT 0x10
#define CNFGA_IMPID_32BIT 0x20
#define CNFGA_NO_TRANS_BYTE 0x04
////////////////////////////////////////////////////////////////////////////////
// ECR values that establish basic hardware modes. In each case, the default
// is to disable error interrupts, DMA, and service interrupts.
////////////////////////////////////////////////////////////////////////////////
#if (0 == PARCHIP_ECR_ARBITRATOR)
#define DEFAULT_ECR_PS2 0x34
#define DEFAULT_ECR_ECP 0x74
#endif
//
// Bit definitions for ECR register.
//
#define ECR_ERRINT_DISABLED 0x10
#define ECR_DMA_ENABLED 0x08
#define ECR_SVC_INT_DISABLED 0x04
#define ECR_MODE_MASK 0x1F
#define ECR_SPP_MODE 0x00
#define ECR_BYTE_MODE 0x20 // PS/2
#define ECR_BYTE_PIO_MODE (ECR_BYTE_MODE | ECR_ERRINT_DISABLED | ECR_SVC_INT_DISABLED)
#define ECR_FASTCENT_MODE 0x40
#define ECR_ECP_MODE 0x60
#define ECR_ECP_PIO_MODE (ECR_ECP_MODE | ECR_ERRINT_DISABLED | ECR_SVC_INT_DISABLED)
#define ECR_EPP_MODE 0x80
#define ECR_EPP_PIO_MODE (ECR_EPP_MODE | ECR_ERRINT_DISABLED | ECR_SVC_INT_DISABLED)
#define ECR_RESERVED_MODE 0x10
#define ECR_TEST_MODE 0xC0
#define ECR_CONFIG_MODE 0xE0
#define DEFAULT_ECR_TEST 0xD4
#define DEFAULT_ECR_COMPATIBILITY 0x14
#define DEFAULT_ECR_CONFIGURATION 0xF4
#define ECR_FIFO_MASK 0x03 // Mask to isolate FIFO bits
#define ECR_FIFO_FULL 0x02 // FIFO completely full
#define ECR_FIFO_EMPTY 0x01 // FIFO completely empty
#define ECR_FIFO_SOME_DATA 0x00 // FIFO has some data in it
#define ECP_MAX_FIFO_DEPTH 4098 // Likely max for ECP HW FIFO size
//------------------------------------------------------------------------
// Mask and test values for extracting the Implementation ID from the
// ConfigA register
//------------------------------------------------------------------------
#define CNFGA_IMPID_MASK 0x70
#define CNFGA_IMPID_SHIFT 4
#define FIFO_PWORD_8BIT 1
#define FIFO_PWORD_16BIT 0
#define FIFO_PWORD_32BIT 2
#define TEST_ECR_FIFO(registerValue,testValue) \
( ( (registerValue) & ECR_FIFO_MASK ) == testValue )
//////////////////////////////////////////////////////////////////////////////
// The following BIT_x definitions provide a generic bit shift value
// based upon the bit's position in a hardware register or byte of
// memory. These constants are used by some of the macros that are
// defined below.
//////////////////////////////////////////////////////////////////////////////
#define BIT_7 7
#define BIT_6 6
#define BIT_5 5
#define BIT_4 4
#define BIT_3 3
#define BIT_2 2
#define BIT_1 1
#define BIT_0 0
#define BIT_7_SET 0x80
#define BIT_6_SET 0x40
#define BIT_5_SET 0x20
#define BIT_4_SET 0x10
#define BIT_3_SET 0x8
#define BIT_2_SET 0x4
#define BIT_1_SET 0x2
#define BIT_0_SET 0x1
//////////////////////////////////////////////////////////////////////////////
// The following defines and macros may be used to set, test, and
// update the Device Control Register (DCR).
//////////////////////////////////////////////////////////////////////////////
#define DIR_READ 1
#define DIR_WRITE 0
#define IRQEN_ENABLE 1
#define IRQEN_DISABLE 0
#define ACTIVE 1
#define INACTIVE 0
#define DONT_CARE 2
#define DVRH_USE_FAST_MACROS 1
#define DVRH_USE_NIBBLE_MACROS 1
//////////////////////////////////////////////////////////////////////////////
// The following defines may be used generically in any of the SET_xxx,
// TEST_xxx, or UPDATE_xxx macros that follow.
//////////////////////////////////////////////////////////////////////////////
#if (1 == DVRH_USE_FAST_MACROS)
#define SET_DCR(b5,b4,b3,b2,b1,b0) \
((UCHAR)((b5==ACTIVE? BIT_5_SET : 0) | \
(b4==ACTIVE? BIT_4_SET : 0) | \
(b3==ACTIVE? 0 : BIT_3_SET) | \
(b2==ACTIVE? BIT_2_SET : 0) | \
(b1==ACTIVE? 0 : BIT_1_SET) | \
(b0==ACTIVE? 0 : BIT_0_SET) ) )
#else
#define SET_DCR(b5,b4,b3,b2,b1,b0) \
((UCHAR)(((b5==ACTIVE?1:0)<<BIT_5) | \
((b4==ACTIVE?1:0)<<BIT_4) | \
((b3==ACTIVE?0:1)<<BIT_3) | \
((b2==ACTIVE?1:0)<<BIT_2) | \
((b1==ACTIVE?0:1)<<BIT_1) | \
((b0==ACTIVE?0:1)<<BIT_0) ) )
#endif
typedef enum {
PHASE_UNKNOWN,
PHASE_NEGOTIATION,
PHASE_SETUP, // Used in ECP mode only
PHASE_FORWARD_IDLE,
PHASE_FORWARD_XFER,
PHASE_FWD_TO_REV,
PHASE_REVERSE_IDLE,
PHASE_REVERSE_XFER,
PHASE_REV_TO_FWD,
PHASE_TERMINATE,
PHASE_DATA_AVAILABLE, // Used in nibble and byte modes only
PHASE_DATA_NOT_AVAIL, // Used in nibble and byte modes only
PHASE_INTERRUPT_HOST // Used in nibble and byte modes only
} P1284_PHASE;
typedef enum {
HW_MODE_COMPATIBILITY,
HW_MODE_PS2,
HW_MODE_FAST_CENTRONICS,
HW_MODE_ECP,
HW_MODE_EPP,
HW_MODE_RESERVED,
HW_MODE_TEST,
HW_MODE_CONFIGURATION
} P1284_HW_MODE;
#endif // _PARALLEL_
Reference in New Issue View Git Blame Copy Permalink